ORIGINAL PRUSA I3 MK3S Laajenna

ORIGINAL PRUSA I3 MK3S

Prusa Research s.r.o.,

PRUSA_I3_MK

Uusi

Alkuperäinen Prusa i3 MK3 / S on "Paras 3D-tulostin" All3DP.com: n ja MAKE: Magazine -lehden mukaan, missä MK3 / S sai myös "Editor's Choice" -arvioinnin parhimmaksi 3D-tulostimeksi vuonna 2019

Tiedot

Toimitusaika: Tilaustuote, ei heti varastossa

1 511,00 €

sis. alv
1 218,55 € Alv 0%.
75,05 €/kk (24kk) *    Lue lisää

Ostamalla tämän tuotteen voit kerätä jopa 302 kanta-asiakaspistettä. Ostoskorissasi on yhteensä 302 pistettä, jotka voidaan muuntaa alennuskupongiksi 15,10 €.

Alkuperäinen Prusa i3 MK3 / S on "Paras 3D-tulostin" All3DP.com: n ja MAKE: Magazine -lehden mukaan, missä MK3 / S sai myös "Editor's Choice" -arvioinnin parhaiten arvioiduksi 3D-tulostimeksi vuonna 2019 Digital Fabrication Guide. MK3S: ssä on uudelleenrakennettu puristin, lukuisia antureita ja erilaisia älykkäitä ominaisuuksia. Lisäksi uusi magneettinen MK52 -lämmitin vaihdettavalla PEI-jousiteräksellä tulostusarkilla. Kymmenet erilaiset parannukset ja päivitykset parantavat luotettavuutta ja helppokäyttöisyyttä. MK3S: n toiminnallisuus voidaan käyttää edelleen ainutlaatuisella Multi-Material Upgrade 2S -lisäosalla, joka tulostaa jopa viisi materiaalia samanaikaisesti.

WITH THE ORIGINAL PRUSA i3 MK3S WE ARE INTRODUCING:

NEW FILAMENT SENSOR

The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament and cannot die because of mechanical wear.

BETTER SERVICE & PRINTS

Thanks to completely reworked extruder changing the nozzle or PTFE tube is easier than ever before. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. MK3S is also better for printing from flexible materials.

DOZENS OF TWEAKS

MK3S includes all the cumulative upgrades from the entire life cycle of the MK3 like genuine Gates belts, textile sleeves, a new Einsy case for easier Raspberry Pi connection, an anti-rust coating on smooth PEI sheets and, of course, dozens of firmware and plastic parts enhancements.


The Original Prusa i3 MK3/S is the "Best 3D printer" according to All3DP.com and MAKE: Magazine, where MK3/S also received "Editor's Choice" as the highest-rated 3D printer in 2019 Digital Fabrication Guide. The MK3S features a rebuilt extruder, numerous sensors, and various smart features. Plus, a new magnetic MK52 heatbed with replaceable PEI spring steel print sheet. Dozens of various tweaks and upgrades improve the reliability and ease of use. MK3S‘s functionality can be further expended with the unique Multi-Material Upgrade 2S addon for printing with up to 5 materials simultaneously.




WHAT WE ARE PROUD OF...

The most significant features of Original Prusa i3 MK3S

REMOVABLE HEATBED

The new MK52 Magnetic HeatBed holds a replaceable alloy spring steel sheet with a PEI surface. You can choose between two types of sheets - smooth PEI sheet (default option, already available) and textured powder coated PEI (this will be available later). 

FRAME STABILITY

With the MK3S we are introducing the reworked Y axis from aluminum extrusion. It provides the same rigidity as some other printers while providing the sleek look of our milled Dural frame. The frame is also optimized to add 10 mm of Z height totaling at 210 mm.

SILENT & FASTER PRINTING

Thanks to the new Trinamic2130 drivers and Noctua fan, the MK3S is extremely quiet in the stealth mode. But the MK3S is quieter than 99 % of the available printers, even in the Normal mode. In normal mode, we have also increased the printing speed. Now you can achieve more than 200 mm/s!

POWER PANIC

Have you ever tripped over the extension cord and lost a 20-hours print? MK3S will save you! The printer can fully recover from the loss of power. It detects power interruption and shuts down the heatbed and extruder heating. After restoring the power, you can continue with printing.

FILAMENT SENSOR

With MK3S we are introducing a completely reworked extruder with a new filament sensor. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.

PREVENTS SHIFTED LAYERS

The new EINSY RAMBo motherboard with Trinamic drivers not only makes the MK3S silent but it also can detect skipped steps and layer shifting. This is a big step forward in the reliability of the printer and the user comfort. You can say goodbye to ugly prints!

BONDTECH EXTRUDER

The extruder has now upgraded with Bondtech drive gear. It grips the filament from both sides, increasing the push force and making the printer more reliable. This is useful especially for flexible filaments. Also, the print fan now cools part from two sides, increasing the overall performance.

P.I.N.D.A. 2 PROBE

MK3S has two new thermistors. The first one measures ambient temperature on the electronics, preventing MINTEMP errors in rooms with 15°C or less. The second one is embedded in the new P.I.N.D.A. 2 probe to compensate for temperature drift. So the first layer will always be spot on!

E3D V6 NOZZLE

E3D V6 is market-leading all metal hotend well known for its high-temperature performance. The MK3S utilizes a custom heatbreak developed together with E3D. The reliability has proved in our Multi Material upgrade and continues to deliver great performance in surprisingly small form factor.

Kootisivut: https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html#1


Hyväksy Käytämme sivustoillamme evästeitä parhaan käyttö- ja ostoskokemuksen saavuttamiseksi. Asioimalla sivuillamme hyväksyt evästeiden käytön. Lisätietoja